SNQC1010 Vehicle Connector and Plug Drive Over Testing Apparatus

Altri video
February 26, 2022
The vehicle drive-over testing machine conforms to IEC62196-1: 2020 clause 33, NB/T42077-2016 clause 9.34, etc.
The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle.
This apparatus can match the force of (5000±250) N or (11000±550) N shall be applied by a conventional automotive tire, P225/75R15 or an equivalent tire suitable for the load, mounted on a steel rim and inflated to a pressure of (2.2±0.1) bar.
The wheel is to be rolled over the vehicle connector or plug at a speed of (8±2) km/h. The accessory is to be oriented in a natural resting position before applying the force in a different direction for each sample. The accessory under test shall be held or blocked in a fixed position so that it does not move substantially during the application of the applied force. In no case is the force to be applied to the projecting pins.
Video correlati

Perché non provare la nostra camera di prova di getto d'acqua?

Apparecchiatura di collaudo dell'ingresso dell'acqua
May 21, 2025

Qual è l'uso dell'apparecchio di prova del filo incandescente?

Attrezzatura per test di infiammabilità
June 14, 2025

Questa batteria supererà il test di pesante impatto?

Attrezzature per la prova delle batterie dei veicoli elettrici
August 06, 2025

È il vostro prodotto a prova di fuoco?

Attrezzatura per test di infiammabilità
January 03, 2025

Qual è la migliore soluzione per le prove di protezione IPX3 IPX6?

Apparecchiatura di collaudo dell'ingresso dell'acqua
June 02, 2025

Può il vostro prodotto sopravvivere all'Ultimate Vertical Drip Test?

Apparecchiatura di collaudo dell'ingresso dell'acqua
May 16, 2025

Quanto è forte la presa di ricarica del vostro veicolo elettrico?

Attrezzature per la prova dei connettori EV
November 30, 2024