logo

Dettagli dei prodotti

Created with Pixso. Casa Created with Pixso. prodotti Created with Pixso.
Camera di prova di umidità di temperatura
Created with Pixso.

Temperature Humidity Chamber High and Low Temperature Test Equipment 960L

Temperature Humidity Chamber High and Low Temperature Test Equipment 960L

Marchio: Sinuo
Numero di modello: SN881-960L
MOQ: 1
Condizioni di pagamento: T/t
Capacità di approvvigionamento: 10 set al mese
Informazioni dettagliate
Luogo di origine:
Cina
Certificazione:
Calibration Certificate (Cost Additional)
Deviazione di temperatura:
≤±2.0℃
Diviazione di umidità:
≤ ± 3%
Dimensioni interne:
2000*600*800 mm
Dimensioni esterne:
2250*1650*1820 mm
Tempo di riscaldamento:
≧2-3°C/min
Tempo di raffreddamento:
¥1°C/min, media senza carico
Intervallo di temperatura:
-20 ° C ~+150 ° C.
Gamma di umidità:
20%~98%RH
Imballaggi particolari:
Imballaggio delle esportazioni
Capacità di alimentazione:
10 set al mese
Descrizione del prodotto

 
 

Temperature Humidity Chamber High and Low Temperature Test Equipment 960L
 

Complied Standards & Clauses


 

It conforms to standards:

IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”

 

Product Overview


 

This environmental test chamber is designed to simulate extreme climatic conditions, including cold, heat, humidity, and dryness. It is widely applied to raw materials and finished products such as electronics, electrical appliances, plastics, and other components. By subjecting products to alternating high and low temperatures as well as humidity cycles, the chamber helps evaluate and ensure product reliability during storage, transportation, and actual use.


Technical Parameters


 

Technical Parameters
Control & Operation PLC and touch screen intelligent control system

Chamber Size

 

Inner Size (mm) External Size (mm)
2000*600*800 2250*1650*1820
Temperature Range -20°C ~+150°C
Humidity Range

20%~98%RH

Temperature Humidity Chamber High and Low Temperature Test Equipment 960L 0
(Temperature: 20℃~85℃, refer to the temperature and humidity controllable range diagram, no active heat load)

Temperature fluctuation ±0.5℃
Humidity fluctuation ≤2.5%
Temperature deviation ≤±2.0℃
Humidity Deviation ≤±3%
Heating Rate ≧2-3°C/min
Cooling Rate ≧1°C/min, average no load
Load condition None
Working noise

A sound level≤70dB(A)

(Measured in a soundproof room with an ambient temperature of 25°C and low echo. Using A weighting, test the average of 9 points. Each test point is 1 meter away from the noise source horizontally and 1 meter above the ground.)

Temperature and Humidity Range Scheme Temperature Humidity Chamber High and Low Temperature Test Equipment 960L 1
 
 

Details


 

Temperature Humidity Chamber High and Low Temperature Test Equipment 960L 2Temperature Humidity Chamber High and Low Temperature Test Equipment 960L 3